Blog

OS1 vs OS2 Fiber: Key Differences, Attenuation, Distance & Selection Guide
When selecting single mode fiber cable for a new installation, the choice between OS1 and OS2 comes down to your specific link distance, installation When selecting single mode fiber cable for a new installation, the choice between OS1 and OS2 comes down to your specific link distance, installation environment, optical transceiver, and future network requirements.

PLC Splitter Training
PLC splitter, short for Planar Waveguide Circuit splitter, is used to divide one or two light beams to multiple light beams uniformly or combine multiple light beams to one or two light beams. It is a passive optical device, applied to PON (EPON and GPON in FTTH application) to connect OLT in cerntral office and

Difference between PLC Splitter and FBT Coupler
A fiber optic splitter is a passive optical device that can split or separate an incident light beam into two or more light beams. These beams may or may not have the same optical power as the original beam, based on the manufacturing technology of the splitter.There are two types of fiber optic splitters: PLC

Fiber Types
There are many fiber types, but two main fiber types: single mode fibers (SM) and Multi-mode fibers (MM). SM fibers: ITU Spec. IEC SMF Type TIA Spec Description G.652 B1.1 TIA 492CAAA / OS1 Standard Singlemode Fiber G.652 B1.3 TIA 492CAAB / OS2 Low Water Peak Fiber G.653 B2 Dispersion Shifted Fiber G.655 B4 TIA-492E000

PON vs AON – What You Should Know
Fiber to the Home (FTTH) is a type of access technology where communication signals are sent from a central point directly to customers by fibre optic cables. In comparison with traditional access networks based on copper-based technology, FTTH offers a much higher level of bandwidth and data speed, as well as the capability to transmit data

FTTH Fiber Drop Clamp Solution
Introduce of Drop Wire Clamp Request a quote today to ensure your FTTH or aerial deployment meets global reliability standards. OptoLink offers the highest quality Drop Wire Clamp (DWC) solutions for use on FTTH aerial fiber deployment, aerial telecom lines, as well as low voltage service drop lines globally. This webpage was created to assist Project Engineers, Distributors and Procurement
